Ace Alloys LLP

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

A Mild Steel Elbow is a crucial pipe fitting used in piping and pipeline systems to change the direction of fluid flow. Manufactured from high-quality mild steel, this elbow is widely used across various industrial applications due to its strength, durability, and cost-effectiveness. Mild steel elbows are designed to withstand moderate pressure and temperature conditions, making them suitable for both industrial and commercial piping systems.

Mild steel elbows are typically available in 45°, 90°, and 180° angles, allowing flexibility in pipeline layout and design. These fittings are commonly produced in short radius (SR) and long radius (LR) configurations, ensuring smooth flow direction changes with minimal pressure drop. The smooth internal surface of the elbow reduces turbulence, erosion, and friction losses, thereby improving overall system efficiency.

The material composition of mild steel provides excellent weldability, machinability, and formability, allowing easy installation through welding, threading, or flanged connections. Mild steel elbows can be fabricated in seamless or welded construction, depending on application requirements. They are compatible with various surface finishes such as black, galvanized, painted, or epoxy-coated, which enhance corrosion resistance and extend service life, especially in harsh environments.

These elbows are extensively used in oil and gas pipelines, water supply systems, fire protection systems, HVAC installations, power plants, chemical processing units, structural piping, and industrial fluid transfer systems. Due to their robustness, they can handle liquids, gases, steam, and slurry applications efficiently.

Mild steel elbows conform to international standards such as ASME, ASTM, ANSI, DIN, and IS, ensuring dimensional accuracy, pressure tolerance, and material reliability. They are available in a wide range of sizes and wall thicknesses to meet diverse operational requirements.

Stainless steel short radius elbows are compact butt-weld fittings providing 90-degree (or other angles) direction changes with a bend radius equal to the nominal pipe size, ideal for space-constrained installations.​

Dimensions

For NPS 3, outside diameter at bevel is 88.9 mm with center-to-end distance of 76 mm; NPS 4 reaches 114.3 mm OD and 102 mm center-to-end. NPS 6 measures 168.3 mm OD at 152 mm.​

Specifications

Made from ASTM A403 grades like WP304 or WP316 per ASME B16.9, sizes 1/2" to 48" NPS in schedules 10S to XXS, seamless or welded for pressures up to Class 2500.​

Carbon steel elbows are pipe fittings used to change the direction of flow in piping systems, commonly at 90° or 45° angles. A 2-inch liner carbon steel elbow typically refers to a size 2" (nominal pipe size, with outer diameter around 2.375") elbow featuring a liner, such as a PTFE or rubber liner for corrosion resistance in harsh environments like chemical processing or abrasive slurries.

Key Specifications

These elbows are often forged or seamless carbon steel (e.g., ASTM A234 WPB material) rated for high pressure, such as 6000 PSI for threaded versions or Sch 40/80 for butt-weld types. Common dimensions include a centerline radius of 1.5x pipe diameter for long radius (LR) elbows, weighing about 16 lbs for 2" 90° models. Liners add internal protection, typically 1-3mm thick, to prevent galvanic corrosion when handling acids or caustics.​

Applications

Ideal for industrial piping in oil & gas, petrochemicals, and water treatment where carbon steel provides strength and affordability. The liner extends service life in corrosive services, compliant with standards like ASME B16.9 for butt-weld or B16.11 for socket-weld/threaded fittings. For Ace Alloys contexts, these suit B2B supply in flanges and fittings sectors

 

A Stainless Steel 1D Elbow is a short-radius (SR) pipe fitting designed to change direction by 90 or 60 degrees in compact piping systems. Its radius is equal to the nominal pipe diameter (1D=1×Diameter1 D equals 1 cross Diameter1D=1×Diameter), providing a sharper, tighter turn than long-radius elbows. Manufactured from stainless steel (commonly 304/316) for high corrosion resistance, it is ideal for high-pressure, space-constrained industrial applications. 

Stainless steel 1D elbows feature a tight bend radius equal to the pipe's nominal diameter, typically 90-degree configurations for compact piping layouts where space limits long radius options. They utilize ASTM A403 grades like WP304 or WP316 for excellent corrosion resistance and weldability in demanding industrial applications.​

Dimensions

For a 3" (80 mm OD) 1D elbow with 2 mm wall, center-line radius measures 82.5 mm and height around 34 mm, weighing approximately 0.64 kg. A 6" size reaches 150 mm radius and 2.60 kg for Sch 40S schedule.​

Stainless steel 3D elbows feature a bend radius three times the pipe diameter, typically 90-degree configurations that balance compactness with smooth flow in piping systems. They use ASTM A403 grades like WP304 or WP316 for corrosion resistance and weldability in chemical, food, and marine applications.​

Dimensions

For a 2" NPS 3D elbow, outside diameter measures 60.3 mm with center-to-end (A) of 152 mm. A 4" size reaches 114.3 mm OD and 305 mm A; 6" shows 168.3 mm OD at 457 mm center-to-end.​

Specifications

Conform to ASME B16.9 standards, sizes 1/2" to 48" NPS in schedules 10S to XXS, seamless or welded. They support Class 3000+ pressures with angular accuracy ±3 degrees.​

A Carbon Steel Seamless Elbow is a high-strength pipe fitting designed to change the direction of flow in piping systems while maintaining structural integrity under high pressure and temperature conditions. Manufactured from premium-quality carbon steel using a seamless process, this elbow offers superior mechanical strength, uniform wall thickness, and enhanced resistance to stress, corrosion, and deformation compared to welded fittings.

The seamless construction eliminates weld joints, making the elbow highly reliable for critical applications where leakage, fatigue, and failure risks must be minimized. Carbon steel seamless elbows are commonly available in 45°, 90°, and 180° angles, and in long radius (LR) and short radius (SR) designs to suit various pipeline configurations and flow requirements. The smooth internal bore ensures efficient fluid flow with reduced turbulence and pressure loss.

Carbon steel seamless elbows exhibit excellent tensile strength, impact resistance, and thermal stability, allowing them to perform effectively in demanding environments. They are suitable for handling high-pressure fluids, steam, oil, gas, and corrosive media. These fittings are compatible with various joining methods such as butt welding, ensuring leak-proof and durable connections.

Surface finishes may include black finish, anti-rust oil coating, galvanizing, or epoxy coating, depending on application and environmental exposure. Carbon steel seamless elbows are manufactured in compliance with international standards such as ASTM A234 WPB, ASME B16.9, ANSI, DIN, and IS, ensuring dimensional accuracy, material consistency, and performance reliability.

These elbows are widely used in oil and gas pipelines, petrochemical plants, refineries, power generation units, chemical processing industries, water treatment facilities, boiler systems, and heavy engineering projects. Their durability and long service life make them a cost-effective solution for both onshore and offshore applications.

Stainless steel 90-degree threaded elbows are forged pipe fittings with NPT or BSPT threads on both ends, designed for 90-degree direction changes in high-pressure piping systems without welding. 

Stainless steel elbows (SS elbows) are precision-engineered butt-weld pipe fittings designed to change flow direction in piping systems, typically at 45°, 90°, or 180° angles, offering exceptional corrosion resistance and durability.​

Key Features

These fittings use ASTM A403 grades like WP304, WP316, or WP316L, providing superior resistance to chemicals, acids, and high temperatures up to 800°C. Available in long radius (1.5D), short radius (1D), 3D, and custom bends for optimized flow and minimal pressure drop.​

Specifications

Conform to ASME B16.9 standards with sizes from 1/2" to 48" NPS across Sch 5S to XXS schedules, seamless or welded construction supporting Class 150-2500 pressures.​

Applications

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

Stainless steel elbows are butt-weld pipe fittings that change flow direction, commonly at 90, 45, or 180 degrees, made from corrosion-resistant grades like ASTM A403 WP304 or WP316. They come in long radius (1.5D), short radius (1D), 3D, and other bend configurations per ASME B16.9 standards.​

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures. ​

Material Grades

Common IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​

Specifications

Available in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

A Carbon Steel Seamless Elbow is a high-strength pipe fitting designed to change the direction of flow in piping systems while maintaining structural integrity under high pressure and temperature conditions. Manufactured from premium-quality carbon steel using a seamless process, this elbow offers superior mechanical strength, uniform wall thickness, and enhanced resistance to stress, corrosion, and deformation compared to welded fittings.

The seamless construction eliminates weld joints, making the elbow highly reliable for critical applications where leakage, fatigue, and failure risks must be minimized. Carbon steel seamless elbows are commonly available in 45°, 90°, and 180° angles, and in long radius (LR) and short radius (SR) designs to suit various pipeline configurations and flow requirements. The smooth internal bore ensures efficient fluid flow with reduced turbulence and pressure loss.

Carbon steel seamless elbows exhibit excellent tensile strength, impact resistance, and thermal stability, allowing them to perform effectively in demanding environments. They are suitable for handling high-pressure fluids, steam, oil, gas, and corrosive media. These fittings are compatible with various joining methods such as butt welding, ensuring leak-proof and durable connections.

Surface finishes may include black finish, anti-rust oil coating, galvanizing, or epoxy coating, depending on application and environmental exposure. Carbon steel seamless elbows are manufactured in compliance with international standards such as ASTM A234 WPB, ASME B16.9, ANSI, DIN, and IS, ensuring dimensional accuracy, material consistency, and performance reliability.

These elbows are widely used in oil and gas pipelines, petrochemical plants, refineries, power generation units, chemical processing industries, water treatment facilities, boiler systems, and heavy engineering projects. Their durability and long service life make them a cost-effective solution for both onshore and offshore applications.

Stainless steel 45-degree threaded elbows are forged fittings that change pipe direction by 45 degrees, featuring female NPT or BSPT threads for secure connections in corrosive environments. They meet ASME B16.11 standards and use grades like ASTM A182 F304 or F316 for superior resistance to rust and chemicals.​

Dimensions

For Class 3000 1/2" NPS: minimum thread length (B) 10.9 mm, outside diameter (D) 38 mm, center-to-end (C) 25 mm. A 2" size shows B 19 mm, D 84 mm, and C 44 mm; 4" reaches D 152 mm and C 79 mm.​

Specifications

Available in pressure classes 2000, 3000, and 6000 LBS, sizes 1/8" to 4" NPS. Stainless construction ensures service up to 800°C with high tensile strength (515 MPa minimum for F304).

A Carbon Steel Seamless Elbow is a high-strength pipe fitting designed to change the direction of flow in piping systems while maintaining structural integrity under high pressure and temperature conditions. Manufactured from premium-quality carbon steel using a seamless process, this elbow offers superior mechanical strength, uniform wall thickness, and enhanced resistance to stress, corrosion, and deformation compared to welded fittings.

The seamless construction eliminates weld joints, making the elbow highly reliable for critical applications where leakage, fatigue, and failure risks must be minimized. Carbon steel seamless elbows are commonly available in 45°, 90°, and 180° angles, and in long radius (LR) and short radius (SR) designs to suit various pipeline configurations and flow requirements. The smooth internal bore ensures efficient fluid flow with reduced turbulence and pressure loss.

Carbon steel seamless elbows exhibit excellent tensile strength, impact resistance, and thermal stability, allowing them to perform effectively in demanding environments. They are suitable for handling high-pressure fluids, steam, oil, gas, and corrosive media. These fittings are compatible with various joining methods such as butt welding, ensuring leak-proof and durable connections.

Surface finishes may include black finish, anti-rust oil coating, galvanizing, or epoxy coating, depending on application and environmental exposure. Carbon steel seamless elbows are manufactured in compliance with international standards such as ASTM A234 WPB, ASME B16.9, ANSI, DIN, and IS, ensuring dimensional accuracy, material consistency, and performance reliability.

These elbows are widely used in oil and gas pipelines, petrochemical plants, refineries, power generation units, chemical processing industries, water treatment facilities, boiler systems, and heavy engineering projects. Their durability and long service life make them a cost-effective solution for both onshore and offshore applications.

A Carbon Steel Seamless Elbow is a high-strength pipe fitting designed to change the direction of flow in piping systems while maintaining structural integrity under high pressure and temperature conditions. Manufactured from premium-quality carbon steel using a seamless process, this elbow offers superior mechanical strength, uniform wall thickness, and enhanced resistance to stress, corrosion, and deformation compared to welded fittings.

The seamless construction eliminates weld joints, making the elbow highly reliable for critical applications where leakage, fatigue, and failure risks must be minimized. Carbon steel seamless elbows are commonly available in 45°, 90°, and 180° angles, and in long radius (LR) and short radius (SR) designs to suit various pipeline configurations and flow requirements. The smooth internal bore ensures efficient fluid flow with reduced turbulence and pressure loss.

Carbon steel seamless elbows exhibit excellent tensile strength, impact resistance, and thermal stability, allowing them to perform effectively in demanding environments. They are suitable for handling high-pressure fluids, steam, oil, gas, and corrosive media. These fittings are compatible with various joining methods such as butt welding, ensuring leak-proof and durable connections.

Surface finishes may include black finish, anti-rust oil coating, galvanizing, or epoxy coating, depending on application and environmental exposure. Carbon steel seamless elbows are manufactured in compliance with international standards such as ASTM A234 WPB, ASME B16.9, ANSI, DIN, and IS, ensuring dimensional accuracy, material consistency, and performance reliability.

These elbows are widely used in oil and gas pipelines, petrochemical plants, refineries, power generation units, chemical processing industries, water treatment facilities, boiler systems, and heavy engineering projects. Their durability and long service life make them a cost-effective solution for both onshore and offshore applications.

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.

IBR alloy steel elbows meet stringent Indian Boiler Regulations (IBR) for high-pressure steam and boiler applications. Manufacturers like Ace Alloys LLP produce these fittings in grades such as ASTM A234 WP5, WP9, WP11, and WP91 for superior strength in elevated temperatures.​
Material GradesCommon IBR-approved alloy steels include WP1, WP5, WP9, WP11, WP12, WP22, and WP91, offering creep resistance up to 600°C. These elbows feature precise chemistry with chromium, molybdenum, and vanadium for oxidation and corrosion resistance. Ace Alloys LLP certifies them with IBR Form III C and NDT reports.​
SpecificationsAvailable in seamless (up to 24" NB) or welded construction (up to 48" NB), sizes range from 1/2" to 48" NB in SCH 10 to XXS. Angles include 30°, 45°, 60°, 90°, with long radius (1.5D) or short radius (1D) bends per ASME B16.9. Pressure ratings suit 150-2500 LBS classes.